Welcome to Eco Light Supply!

My Cart

You have no items in your shopping cart.

Eco Light Supply Ballast Compatible OR BYPASS - (UL+DLC) 18W 4000K T8 4ft LED Tube

  • SKU: ELS-18W-BC-4k-T8
Ballast Compatible OR BYPASS - (UL+DLC) 18W 4000K T8 LED Tube 2160 Lumens 4ft Learn More
Low Price Gurantee



Status: In stock
Learn more
Eco Light Supply Ballast Compatible OR BYPASS - (UL+DLC) 18W 4000K T8 4ft LED Tube

Basic Feature -

T8 direct replacement ballast compatible led tubes are an energy saving product as special replacement for traditional flourescent T8 lamps

- Designed to operate on existing all instant start ballast,rapid start ballast,programmed star ballast and emergency fixture with input voltage of AC120-277V, AC347V.

- Ttubes minimize labor and recycling costs.

- THD less than 20%,

Power factor more than 0.90.

- Reduces energy consumption up to 40%.

- Stable lumens output for different ballast brand with different ballast factor.

- No UV emission.

- This tube only work with ballast.


Detailed Data


Ballast Compatible Led Tube

- Wattage:15W

- Life Span:50000 Hours

- Weight:360g

- Led Chip:96 pieces of SMT 2835

- Power Factor:More than 0.90

- Efficiency:l20 lm/W

- Certificates:DLC,UL,cUL,NSF,Lighting Facts,RoHs DLC model as below ( (only for G13 pins and non Rotating end caps):


Installation Instruction

Prepair for Installation

- Check the ballast installed in the field and make sure the ballast is in manufacturer's ballast list. If the ballast out of the list, a test must needed before mass installation. - Loose and damaged lamp holder and socket need to be adjusted or be replaced. "Plug" and "Play" procedure

- Turn off the power to the light fixture at the breaker panel before installation.

- Open the diffuser from the light fixture.Ensure pins are firmly seated in lampholders.

- Remove the flourescent tubes, Please dispose of these items properly as they contain mercury.

- Put led tube into the lighting fixture.

- Install the Led tube,close the diffuser.

- Turn on the power.

Caution - Use only with ballast.

- Risk of fire.Do not install this lamp in a pre-heat luminaire.

- Risk of electric shock.

- Use only in place of fluorescent lamps specified on label or as a retrofit kit.

- This lamp is not intended for use with emergency exists.

- These lamps are to be used in indoor damp location only.Do not suitable for wet location

. - These lamps are not to be used with a light dimmer.

- If the lamp or luminaire exhibits undesirable operation (Buzzing, Flickering, etc), immediately turn off power,remove lamp from luminaire and contact manufacturer.

- This lamp only operates on electronic ballasts or without any ballast.If lamp does not light when the luminaire is energized, remove this lamp from luminaire and contact manufacturer

- Do not make mass installation before sample testing.

Energy Savings Calculator

Contact Us

Contact Information

* Required Fields